PAVER SEALING & RESTORATION IN OLYMPIA, WA
Paver Sealing in Olympia, WA — Timed to the Dry Window, Specified for Olympia's Wet-Season Clay.
ND Brick Pavers builds paver sealing across Olympia — Capitol Hill, Eastside, Westside, and the rest of Thurston County. We pull a free soil test before we quote, and the base gets designed around what comes back, not around a national spec sheet.

Olympia Ground Conditions
Sealing in Olympia Is a Timing Problem Before It Is a Product Problem
Sealer does not cure on a wet stone. It traps the moisture underneath and turns it into a white haze that has to be stripped back off — which is why so much sealing work in western Washington gets done twice. The window matters more than the brand. Olympia takes over 50 inches of rain a year onto some of the wettest soils in western Washington, including expansive clay near Black Lake and the Deschutes flood zones.
Expansive clay swells when it is wet and shrinks when it dries. A base that ignores that moves twice a year, every year. We run perforated drain pipe, geotextile separation, and a 2% minimum slope across every paver field in this city. Ground moisture wicks up through a paver field long after the surface has dried in the sun, so we book Olympia sealing into a genuine dry stretch and we check the field, not the forecast. Damp, shaded, canopy-heavy yards around Capitol Hill, Eastside and near Washington State Capitol hold moisture and grow moss and algae faster than an open exposure, so those get cleaned and re-sanded properly before any sealer touches them. And if the field is failing because of seasonal heave from expansive clay cycling wet and dry, sealing it is cosmetic — we will tell you that instead of taking the job.
Our soil notes for Olympia
Olympia and the greater Thurston County area sit on some of the wettest soils in western Washington. Expansive clay near Black Lake and Deschutes River flood zones demand aggressive drainage engineering. We install perforated drain pipe, geotextile fabric, and set minimum 2% slope on all paver fields to prevent pooling and base saturation.
Typical Investment — Paver Sealing
$300 – $2,500
Final cost depends on scope, materials, and site conditions. In Olympia, the biggest single variable is the base — and we do not know that number until the soil test comes back. Fixed-price quote after a free site visit.
Get Your Free QuoteOlympia Neighborhoods We Build In
Landmarks Nearby
- Washington State Capitol
- Capitol Lake
- Percival Landing
- Priest Point Park
- Olympia Farmers Market
- South Puget Sound Community College
Overview
Why Sealing Matters More in the Pacific Northwest
Pavers are built to handle water when the base and drainage are correct. In Western Washington, sealing is not a substitute for that system and it will not fix a field that is settling, holding water, or losing its base.
A quality penetrating sealer can reduce staining and organic growth while stabilizing polymeric joint sand. That means less joint erosion, fewer places for weeds to establish, and easier routine cleaning through the wet season.
We inspect the field first, clean and re-sand it where needed, and apply only after a genuine dry stretch. We generally avoid film-forming products on saturated or heavily shaded sites because they can trap moisture and create a cosmetic failure instead of solving one.
Standard Scope
What Every Olympia Paver Sealing Project Includes
Free assessment of existing paver condition
Surface cleaning and preparation (moss treatment, pressure washing)
Joint sand inspection and re-sanding where needed
Commercial-grade penetrating sealer matched to your paver material
Even application by our in-house crew
Natural or low-sheen finish options suited to wet-climate use
Application to patios, driveways, walkways, and pool decks
Post-application cure time guidance
100% in-house crew
How It Works
Your Olympia Project, Step by Step.
Assessment & Cleaning
We inspect the paver surface, treat moss or algae growth, and pressure wash to remove debris, dirt, and efflorescence.
Joint Sand Inspection
Polymeric sand joints inspected and refreshed where degraded. Sealer requires sound joints to be effective.
Sealer Selection
Commercial-grade sealer selected for your specific paver material and finish preference (matte or gloss).
Application
Sealer applied evenly by our crew. Coverage rate and application technique matched to the sealer spec.
Cure & Review
Cure time guidance provided. We walk the project with you and explain the maintenance schedule.

Common Questions
Paver Sealing in Olympia — FAQ
How often should I seal my pavers in Western Washington?
Generally every 3–5 years for commercial-grade sealers in the Pacific Northwest climate. The specific interval depends on the sealer type, sun exposure, and traffic load. We'll recommend a maintenance schedule at the time of application.
Can you seal pavers that already have moss on them?
Yes — but the moss needs to be treated and removed before sealing. Sealing over moss traps it under the sealer and makes removal harder later. Our sealing service includes surface cleaning and moss treatment as part of the prep.
What's the difference between a penetrating sealer and a film-forming sealer?
Penetrating sealers absorb into the paver material and protect from within without changing the appearance — they're the default choice for most applications. Film-forming sealers create a surface layer that can add a gloss or "wet look" finish. Film-forming sealers require more maintenance and can peel in high-moisture climates if not applied correctly. We'll recommend the right type for your pavers and preference.
Near Olympia
Paver Sealing in Neighboring Cities
Everything We Build Here
Other Services in Olympia
Free Consultation — Olympia, WA
Start With a Free
Soil Test.
No commitment and no guesstimates. Brent walks your Olympia property, tests the ground, and hands you a 3D rendering and an itemized quote before you decide anything.
WA Licensed #NDBRIDB815M5 | Bonded #108203276 | Fully Insured | Serving Olympia and Thurston County